Showing 1–15 of 86 results

Tieline Report-IT

In stock

Original price was: €388.Current price is: €369.

RVR RXRL-LCD

In stock

Original price was: €1,495.Current price is: €1,195.
Weight

8.5 kg

Dimensions

53 × 22 × 50 cm

video

0

Product can be split into multiple boxes

0

Ship Separately

0

Color

Black

Wisycom RPU500

In stock

Weight

3.5 kg

video

0

Product can be split into multiple boxes

0

Ship Separately

0

Color

Black

features

Talk-back channel RX (narrowband):16 switchable frequencies in following range:- UHF (400 ÷ 520 MHz) (It is necessary to keep the minimum distance from TX) Easy PC frequency-reprogramming by the user (in the pre-set switching-window). Rapid factory frequency re-allocation (in the whole working-range). Exceptional compact size. Very easy and friendly to operate. High transmitter power output. Very long battery-lifetime , its precise measuring and remote indication. Optional PTT push-button allowing the reporter to remote-switch the stationary receiver AF line-output and speak off-line with the base station. Wisycom exclusive digital sub-carrier technology prevent any degrading of the modulation quality or reduction pf the audio bandwidth for the features:- remote TX battery monitoring- tone-squelch (or "intercom" PTT) operating Exceptional sturdiness and absolute reliability The most advanced RF and AF technologies assures the maximum connecting security even with weak and interfered signals. Main channel TX (broadband): 16 switchable frequencies in either of following ranges:- VHF (130 ÷ 250 MHz) – RPU 300-VU- UHF (330 ÷ 880 MHZ) – RPU 300-UU

Wisycom RBK302

In stock

0
Weight

2.7 kg

features

Main channel RX (broadband):16 switchable frequencies in either of following ranges:- VHF (150 ÷ 250 MHz) – RBK 300-VU- UHF (470 ÷ 880 MHZ) – RBK 300-UU Talk-back channel TX (narrowband):16 switchable frequencies in following range:- UHF (400 ÷ 520 MHz) (It is necessary to keep the minimum distance from TX) True diversity receiving system. Full modular architecture allows to build customized units. Very easy and friendly to operate. Optional switching device (remote-controlled by PTT push-button on the Portable Unit) allowing the reporter to remote-switch the stationary receiver AF output-line between "main" and the auxiliary "intercom" output. Wisycom exclusive digital sub-carrier technology prevent any degrading of the modulation quality or reduction pf the audio bandwidth for the features:- remote TX battery monitoring- tone-squelch (or "intercom" PTT) operating Easy PC frequency-reprogramming by the user (in the pre-set switching-window). Rapid factory frequency re-allocation (in the whole working range). Exceptional sturdiness and absolute reliability The most advanced RF and AF technologies assures the maximum connecting security even with weak and interfered signals.

Color

Black

Ship Separately

0

Product can be split into multiple boxes

0

video

0

Wisycom RTE25

In stock

Weight

1.5 kg

video

0

Product can be split into multiple boxes

0

Ship Separately

0

specification

Technical Data Switchable channels 16 , preset in one of the following ranges (others on request): 140 ÷ 250 MHz , 300 ÷ 360 MHz , 470 ÷ 880 MHz. Switching-window 15 MHz , in the 140 ÷ 250 and 300 ÷ 360 MHz ranges; 25 MHz , in the 470 ÷ 880 MHz range. Frequencies microprocessor controlled PLL frequency synthesizer circuit , with 25 KHz minimum step. They are easily user-re-programmable by DOS-PC and optional “UPK 32 Programming kit”. Frequency error < ± 5 ppm , in the rated temperature range. Temperature range -10 ÷ +55 °C. Modulation FM , with 50 µs pre-emphasis. Nominal deviation ±20 KHz , with NR-system pre-set Off; ±40 KHz , with NR-system pre-set On. Peak deviation ±75 KHz , with NR-system pre-set Off; ±55 KHz , with NR-system pre-set On. RF output power 2.5 W (± 1 dB). Spurious emissions < 250 nW. Antenna connector N-F type. Output impedance 50 ohm. Audio input transformer balanced , floating (XLR3-F connector). Audio input level Micro / Line switchable , and adjustable (for nominal deviation) between: Micro = -60 ÷ -28 dBu (0.77 ÷ 30 mVrms) (Input impedance = > 2 kohm) Line = -32 ÷ 0 dBu (20 ÷ 775 mVrms) (Input impedance = > 5 kohm) Peak-limiter automatic , with dynamic range > 24 dB over the level set for the nominal deviation. NR-system compander circuit , can be internally pre-set (or excluded) between following modes: ENR (Wisycom Extended-NR) , as default NR (Standard-NR) , to be compatible with other apparatus. AF bandwidth 30 Hz ÷ 20 KHz. Frequency response ± 0.5 dB (± 0.25 dB typ.) in the 40 Hz ÷ 19 KHz range. Distortion < 0.3 % (0.15 % typ.). SND/N ratio > 110 dB (115 dB typ.) , with NR-system pre-set On; > 70 dB (76 dB typ.) , with NR-system pre-set Off. (referred to the peak deviation , and measured: 22 Hz/22 KHz , RMS , unweighted). LED indications apparatus On (green LED is on); limiter-on status (red LED is on). Bar-graph meter ± KHz deviation ± dB deviation referred to ± 20 KHz deviation. Powering 10.5 ÷ 16 Vdc / 10 W (typ.: 900 mA @ 12 Vdc) , negative ground mains 100 ÷ 264 Vac , by means of optional PSP25-L "mains-plug" power supply. Dimensions 243 x 43 mm (1/2 x 19”/1U standard-rack) x 226 mm depth. Weight 1.5 Kg approx.

Color

Black

features

Available in various ranges:⇒ 140 ÷ 250 MHz , ⇒ 300 ÷ 360 MHz , ⇒ 470 ÷ 880 MHz. Wide pre-tuned switching-window:⇒ 15 MHz in 140 ÷ 250 and 300 ÷ 360 MHz ranges , ⇒ 25 MHz in the 470 ÷ 880 MHz range. 16 switchable frequencies. Easy PC frequency-reprogramming by the user (in the pre-tuned switching-window). Friendly factory frequency re-allocation (in the whole working-range). Broadcast superlative quality of any audio-signal transposition. Suitable for very complex multi-channel systems thanks to the very low noise and signal clearness. Very easy and friendly to operate. Exceptional sturdiness and absolute reliability.

Wisycom MSR918-D

In stock

Weight

1.7 kg

features

Available in various ranges:⇒ 150 ÷ 250 MHz , ⇒ 470 ÷ 880 MHz. Wide pre-tuned switching-window: ⇒ 15 MHz in 140 ÷ 250 MHz range , ⇒ 15 MHz (VHF) ; 32 MHz (UHF) 16 switchable frequencies. Easy PC frequency-reprogramming by the user (in the pre-tuned switching-window). Friendly factory frequency re-allocation (in the whole working-range). Broadcast superlative quality of any audio-signal transposition. Suitable for very complex multi-channel systems thanks to the extraordinarily high intermodulation immunity and RF/IF selectivity. Very easy and friendly to operate. Exceptional sturdiness and absolute reliability.

Color

Black

specification

Technical Data Switchable channels 16 + 16 , preset in the 150 ÷ 250 MHz (VHF) or 470 ÷ 880 MHz (UHF) range (others on request). Channel groups 2 , externally selectable. Switching-window 15 MHz (VHF); 32 MHz (UHF). Frequencies microprocessor controlled PLL frequency synthesizer circuit , with 25 KHz minimum step. They can be easily user-re-programmed by PC and optional “UPK 100 Programming kit”. Frequency error < ± 5 ppm , in the rated temperature range. Temperature range -10 ÷ +55 °C. Modulation FM , with 50 µs de-emphasis. Nominal deviation ±20 KHz @ 1 KHz. (Max deviation = ±75 KHz). ±40 KHz @ 1 KHz. (Peak deviation = ±60 KHz). “A” / “B” antenna inputs with N-F connectors. RF input impedance 50 ohm (SWR < 1:2; typ. 1:1.4). Sensitivity (ENR) < 2 µV ( +6 dBµV) , for SND/N = 84 dB [1] , in the whole switching range < 10 µV (+20 dBµV) , for SND/N = 96 dB [1]. Amplitude response < 0.2 dB (for RF input signal between +4 dBµV ÷ +120 dBµV). Co-channel rejection > -3.5 dB @ 2 µV RF; > -1.5 dB @ 100 µV RF. Adjacent ch. selectivity > 90 dB (for channel spacing ≥ 400 KHz). Spurious rec. rejection > 93 dB. IF image rejection > 98 dB. Intermodul. rejection > 76 dB.• IIP3 (Input 3°-order Intercept Point) = +9 dBm. Spurious emissions < 10pW (typ. = 0.1 pW). Squelch field strength: with externally adjustable threshold and adaptive-mode working (the receiver adapts itself to the differensituations of medium signal-strength levels and fading speeds). tone-squelch: with decoding of the matching sub-carrier , digitally modulated , generated by the relevant transmitter. This function can be switched-off for the compatibility with other brand TXs. Squelch-controlled is controlled by the squelch circuit. When the AF output line is active , DC output-power the DC input-power is connected to pin 2 of the XLR4-M-DC input-connector on rear panel (max current = 2A). “Noise Reduction” system compander circuit , can be internally pre-set (or switched off) to: ENR (Wisycom Extended-NR). NR (standard-NR) , to be compatible with other systems. AF line output transformer balanced , floating • Output impedance = < 50 ohm. AF output level +10 dBu (2450 mVrms) , @ ±40 KHz deviation. AF bandwidth 20 Hz ÷ 20 KHz. Frequency response < ±0.5 dB (±0.2 dB typ.) in the 30 Hz ÷ 20 KHz range. Distortion < 0.3 % (0.15 % typ.) @±40 KHz deviation (< 0.5 % @ peak deviation). SND/N ratio (ENR) > 105 dB (115 dB typ.) [1]. Monitor output 1/4” (6.3 mm) stereo jack connector , mono wired , on the front panel. Monitor output level max 3 Vrms / 200 ohm , with volume control. Monitor out. impedance 35 ohm. Diversity technology true-diversity (Twin receiver circuits , with high-speed and low-noise electronic switching). Remote diversity function the MSR916 receiver , along with audio signal on the line-output , is signalling also the RSSI level. A Centralized Automatic Selector (i.e.: RDA41 , suitable for 4 remote receivers) can use this voting information to use in any time select the best audio signal. Bar-graph meters RF field strengths (both “A” and “B” antennas at the same time) AF output level (-20 ÷ +12 dBu). TX battery lifetime , 5 steps: 100% , 75% , 50% , 25% , 12% LED indications diversity switching (“A” / “B” antenna) AF output-line is active (AF ON) matching sub-carrier is present (P.TONE) channel Group 1 selected (#1) tone squelch function is on (T.SQL) receiver on. Powering 10.5 ÷ 16 Vdc / 4 W (typ.:330 mA @ 12 Vdc) , negative ground mains 100 ÷ 240 Vac , by means of separated PSP910-X4 “mains-plug” power supply. Size 123 x 49 x 327 mm (1/2 x 19”/1U rack). Weight 1.7 Kg approx.

Ship Separately

0

video

0

Product can be split into multiple boxes

0

Wisycom RPA25

In stock

Weight

4.5 kg

features

Available in the ranges: ⇒ 300 ÷ 360 MHz or ⇒ 470 ÷ 880 MHz. Wide bandwidth: ⇒ 12 MHz in 300 ÷ 360 MHz range , ⇒ 25 MHz in the 470 ÷ 880 MHz range. Very compact unit. Knob adjustable power in excess of 30W continuous working. Precise and reliable direct-power and reflected-power meter. Very low-noise. Very low spurious generation , even with great output mismatching. Very sharp and low-loss output filter prevents noise and harmonics generation. The built-in output-isolator supports up to infinite output mismatching , without switching-off the power , avoiding any interruption of the operations. Broadcast superlative quality. Precise internal temperature measuring and surveillance , front-panel read-out and automatic shut-off in case of really extreme operating conditions. Internal high-efficiency Dc/Dc power converter allows operations in a wide range of powering voltages. “Broken fuse” alarm Led on the front-panel. Very easy and friendly to operate. Exceptional sturdiness and absolute reliability.

Color

Black

specification

Technical Data Frequency range the RPA 25 can be supplied for one of the following ranges: 300 ÷ 360 MHz (BW > 12 MHz) 470 ÷ 880 MHz (BW > 25 MHz). others on request. Input power 1.7 ÷ 3.5 W. Output power 20 ÷ 35 W [@ Power-in = 2W] , adjustable by front-panel knob. Harmonics < -80 dBc (typ. -85 dBc). In / Out impedance 50 Ohm. Input VSWR < 1.2 : 1 Power source 10 ÷ 20 Vdc , negative ground. Power consumption [@13V] approx. 4.5 A [@ Power-out = 25 W]. Size 243 x 87 mm (1/2 x 19”/2U standard-rack) x 230 mm depth. Weight 4.5 kg approx.

Ship Separately

0

video

0

Product can be split into multiple boxes

0

Wisycom RTC25

In stock

Weight

4 kg

video

0

Product can be split into multiple boxes

0

Ship Separately

0

specification

Technical Data Frequency range the RTC 25 can be supplied for one of the following ranges: 300 ÷ 360 MHz (BW > 12 MHz) 470 ÷ 880 MHz (BW > 25 MHz). others on request. Input power max 2 x 50 W continuous. Output power -4 dB referred to the total input power. Spurious emissions < -85 dBc (-90 dBc typ.). In / Out impedance 50 Ohm. Input VSWR < 1.2:1 Output VSWR max infinite , with 2 x 50 W continuous input power. Power source 10 ÷ 20 Vdc , negative ground. Power consumption [@13V] 50 mA max. Size 243 x 87 mm (1/2 x 19”/2U standard-rack) x 230 mm depth. Weight 4 kg approx

Color

Black

features

Available in the ranges: ⇒ 300 ÷ 360 MHz or ⇒ 470 ÷ 880 MHz. Wide bandwidth: ⇒ 12 MHz in 300 ÷ 360 MHz range , ⇒ 25 MHz in the 470 ÷ 880 MHz range. Very compact unit. Supports up to 2 x 50W input-power and up to infinite output mismatching. Input isolators grant very high decoupling of transmitter outputs. Very sharp and low-loss output filter prevents noise and harmonics generation. Precise and reliable direct-power and reflected-power meter. SWR overflow surveillance circuit indicates output mismatching in excess of 1 : 2. Broadcast superlative quality. Very easy and friendly to operate. Exceptional sturdiness and absolute reliability.

TEM Microwave Video Link

In stock

Weight

5 kg

video

0

Product can be split into multiple boxes

0

Ship Separately

0

features

Low distorsion  Low Noise High Freq. Range   from 1.3GHz to 2.4GHz (10MHz Sub-band) Easily and quickly programmable AC Voltage 230V / 24V external Battery  High frequency stability  LCD Display

specification

General Specification Operating voltage 100 / 240VAC Backup Battery 24.0÷28.0V 1.2A Max. Humidity 90% Operational temperature range -5° to 45°C Storage temperature range -40° to 50°C Output RF connector “N” Monitor RF connector BNC Dimensions 430×44 , 4x410mm Weight 5 kg Radio Frequency Frequency range 1.3 to 2.4 GHz Bands 1300÷1400 MHz 1429÷1433 MHz 1517÷1525 MHz 1660÷1670 MHz 1700÷1730 MHz 1785÷1825 MHz 2367.5÷2372.5 MHz 2440÷2450 MHz 2468.1÷2483.3 MHz Frequency stability < 2 , 5 ppm Frequency generation PLL synthesizer Modulation type direct VCO frequency modul. F3 Freq . stepsize 100Khz Deviation linearity in all freq. range ±75KHz RF output power 10W RF Harmonics products <-65 dB RF Spurious products <-80 dB RF Input Level -90 ÷ -10 dBm Audio Characteristics MPX/Mono In/Out Level -1.5 ÷ +12 dBm Input mono impedance 600Ohm Input base band impedance 2 KHom Output impedance < 30 Ohm S/N ratio (30-20000Hz rms) > 70 dB Modulation distorsion @ mod 1KHz < 0.2% MPX input audio level -3.5 ÷ +12.5 dBm Aux channel input level -12.5 ÷ +3.5 dBm MPX monitor output level 0 ÷ +10 dBm Pre-enphasis 0/50/75 uS ±2% Audio freq. response (30Hz-15KHz) ± 0.1 dB

Color

Black

TEM Digital STL

In stock

Weight

5 kg

Product can be split into multiple boxes

0

video

0

Ship Separately

0

specification

Main Power Standard Primary Power 230 VAC 15% 50 Hz 2 Hz 115 VAC 15% 60 Hz 3 Hz Battery Power Standard Battery Power 24 VDC (20 to 28 VDC) Optional Battery Power (special order) 48 VDC (36 to 75 VDC) Digital Input/Output Interface Base Band Interface: comply with (CCITT G.703) Impedance 75 (unbalanced) Line Code HDB3 Bit Rate 2‐8‐34 Mbit/s Mpeg Transport Stream Interface (EN50083‐9) 1 to 32 Mbit/S payload TS ASI Input 1 x BNC 75 ohm Return loss >15dB (from 5 to 270MHz) Automatic cable adaptation ASI Output 2 x BNC 75 ohm 800 mVpp 70 MHz IF MODULATION Type of Modulation QPSK (Offset) 70 MHz IF Carrier Frequency Drift 20 PPM Nominal IF Output Level + 5 dBm RF General Operating Frequency Bands 1.5 GHz to 24 GHz RF Connector System 1.5 to 10 GHz type “N” or waveguide RF Connector system: higher than10 GHz waveguide Remote RF HEAD ‐ Transmitter Standard RF Output Power +20 dBm 2 dB (100 mW +30 dBm 2 dB (1 W)) Frequency drift within the rated operating temperature range 10 PPM Spurious Suppression 60 dB Nominal 70 MHz IF Input Level + 5 dBm (– 10 to + 5 dBm) Remote RF HEAD ‐ Receiver: Noise Factor 5 dB Input Return Loss 20 dB Nominal Input Level ‐ 40 dBm Maximum Input Level ‐ 20 dBm Frequency Drift within the rated operating Temperature Range 10 ppm RF Alarm Threshold Factory Setting RF signal for output ”BER” = 1×10(‐³) Image Rejection 65 dB Nominal IF Gain (RF Head) + 40 dB Mechanical Dimensions and Weight Remote RF Head (Weatherproof Aluminium Alloy Case) L = 260 W = 210 H = 130 mm Weight 4 kg IF Mod/Dem Unit (19” Standard Chassis ‐ one unit) L = 335 W = 483 H = 44 mm Weight 5 kg

Color

Black

features

Available from 1 , 5 to 15 GHz 16 pre‐tuned RF channels , userselectable Power Supply: from AC mains or from DC (battery) Power levels from 100 mW to 1 Watt Capacity: ASI IN/OUT Outdoor RF unit fully weather resistant Full broadcast quality Comprehensive range of antennas and mechanical accessories

TEM AoIP Link

In stock

features

High Quality HE-AAC (v.1 and v.2) , MPEG-1 and MPEG-3 Decoding 32 kHz , 44.1 and 48 kHz sample rates support Support of all standard bitrates and VBR as well 6 LEDS and Phones output for quick diagnostics IP address pronunciation at startup (through the headphones) DHCP Client automatically assigning Network Settings Full Control and easy setup via a standard web browser UpnP for easy discovery in Local Networks Shoutcast / Icecast compatible TCP/IP stream Analog Audio Input (2 x RCA connectors) Digital Audio Input (RCA Connector) RJ-45 Ethernet Connector Auto switching to another server in the event of a connection loss Up to 10 simultaneously connected clients

Color

Black

Ship Separately

0

Product can be split into multiple boxes

0

video

0